Time needed: 1 hour

How To Repair A Vaillant Diverter Valve Permanently
In this article we look at how to repair a leaking Vaillant diverter valve — and why the standard industry repair is not the permanent solution it appears to be.
Why does a Vaillant diverter valve leak?
The diverter valve in a Vaillant boiler controls the flow of hot water between the central heating and the domestic hot water circuit. Inside the valve is a cartridge containing rubber O ring seals. Over time these seals wear out — typically after 4–5 years — and the valve begins to leak internally. The result is reduced hot water pressure, heating that won’t come on, or a boiler that locks out entirely.
The standard industry fix is to replace the entire diverter valve. This costs £60–£140 in parts alone and carries only a 1-year warranty. Worse, the new valve contains the same seals that wore out in the first place — so the problem will return.
A permanent alternative — the Fit Once™ cartridge
The Fit Once™ repair kit from Buycombi takes a different approach. Rather than replacing the entire valve body, only the internal cartridge is replaced — the part that actually wears. The Fit Once™ cartridge is a patented UK design (GB2569552) and is the only serviceable diverter valve cartridge on the market. When the seals eventually need replacing, only the small seal canister is changed — in just 36 seconds, without draining the boiler. The cartridge itself is designed to last the lifetime of the boiler.
Fit Once™ kits are available for Vaillant ecoTEC (plastic and brass valves), Vaillant ecoFIT Pure, Sustain and Home, Glow-worm and Heatline boilers.
What you will need
The Fit Once™ repair kit (includes cartridge, extraction tool, insertion tool and service tool)
A screwdriver
An adjustable spanner
An isolation valve key if the boiler is old (available separately from Buycombi)
Full detailed instructions are included with every kit. Supporting installation videos are available on our Instructions & Videos page.

How to repair a Vaillant diverter valve — step by step

  1. Remove The Valve Motor & Drain Boiler

    Unscrew the nut holding the motor in place and remove the motor. Drain the boiler before proceeding. Use the 2 isolation valves underneath the boiler fitted so you can isolate the boiler rather than draining the the full system. These valves can become ceased with age but our isolation tool will open them.

  2. Unlock The Leaking Internal Cartridge

    Use the unlocking tool provided in the Fit Once™ kit to unlock the cartridge. The tool is designed specifically for this purpose and locates precisely onto the cartridge.

  3. Extract The Old Cartridge

    Insert the extraction tool — which has a hardened steel tip for a firm grip — and extract the old cartridge. The steel tip ensures reliable extraction even on cartridges that have been in place for several years.

  4. Insert Replacement Fit Once(tm) Cartridge

    Insert the new Fit Once™ cartridge using the insertion tool provided. Take care to ensure it is inserted the correct way — the hole on the side of the cartridge must face outward to the left.

  5. Re-attach Motor and Fill Boiler

    Reattach the motor and tighten the retaining screw. Repressurise the boiler to 1.5 bar. Run the heating and then the hot water to purge air from the system. Bleed any radiators where air has collected.

  6. Servicing Your Fit Once(tm) Cartridge

    Once the Fit Once™ cartridge is installed, future maintenance is straightforward. The small seal canister can be replaced using the service tool — with no need to drain the boiler. The process takes around 36 seconds. We recommend checking and replacing the seals every 2–3 years depending on the quality of your system water. Fitting a magnetic filter and using a good quality inhibitor will significantly extend seal life.
    Replacement seal canisters are available directly from Buycombi at £7.99.Seal canister for Fit Once cartridge

How much does a Vaillant diverter valve repair cost?

The Fit Once™ repair kit costs significantly less than a standard OEM replacement valve and carries a 3-year warranty — three times longer than the standard 1-year OEM warranty. For a full cost comparison see our page: How much does a Vaillant diverter valve cost?

Test Data

For full engineering and test data see our engineering data page.

Scroll to Top